# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/nxp,lpc1850-cgu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NXP LPC1850 Clock Generation Unit (CGU)

description: >
  The CGU generates multiple independent clocks for the core and the
  peripheral blocks of the LPC18xx. Each independent clock is called
  a base clock and itself is one of the inputs to the two Clock
  Control Units (CCUs) which control the branch clocks to the
  individual peripherals.

  The CGU selects the inputs to the clock generators from multiple
  clock sources, controls the clock generation, and routes the outputs
  of the clock generators through the clock source bus to the output
  stages. Each output stage provides an independent clock source and
  corresponds to one of the base clocks for the LPC18xx.

  Above text taken from NXP LPC1850 User Manual.

maintainers:
  - Frank Li <Frank.Li@nxp.com>

properties:
  compatible:
    const: nxp,lpc1850-cgu

  reg:
    maxItems: 1

  '#clock-cells':
    const: 1
    description: |
      Which base clocks that are available on the CGU depends on the
      specific LPC part. Base clocks are numbered from 0 to 27.

      Number:         Name:                   Description:
       0              BASE_SAFE_CLK           Base safe clock (always on) for WWDT
       1              BASE_USB0_CLK           Base clock for USB0
       2              BASE_PERIPH_CLK         Base clock for Cortex-M0SUB subsystem,
                                        SPI, and SGPIO
       3              BASE_USB1_CLK           Base clock for USB1
       4              BASE_CPU_CLK            System base clock for ARM Cortex-M core
                                        and APB peripheral blocks #0 and #2
       5              BASE_SPIFI_CLK          Base clock for SPIFI
       6              BASE_SPI_CLK            Base clock for SPI
       7              BASE_PHY_RX_CLK         Base clock for Ethernet PHY Receive clock
       8              BASE_PHY_TX_CLK         Base clock for Ethernet PHY Transmit clock
       9              BASE_APB1_CLK           Base clock for APB peripheral block # 1
      10              BASE_APB3_CLK           Base clock for APB peripheral block # 3
      11              BASE_LCD_CLK            Base clock for LCD
      12              BASE_ADCHS_CLK          Base clock for ADCHS
      13              BASE_SDIO_CLK           Base clock for SD/MMC
      14              BASE_SSP0_CLK           Base clock for SSP0
      15              BASE_SSP1_CLK           Base clock for SSP1
      16              BASE_UART0_CLK          Base clock for UART0
      17              BASE_UART1_CLK          Base clock for UART1
      18              BASE_UART2_CLK          Base clock for UART2
      19              BASE_UART3_CLK          Base clock for UART3
      20              BASE_OUT_CLK            Base clock for CLKOUT pin
      24-21           -                       Reserved
      25              BASE_AUDIO_CLK          Base clock for audio system (I2S)
      26              BASE_CGU_OUT0_CLK       Base clock for CGU_OUT0 clock output
      27              BASE_CGU_OUT1_CLK       Base clock for CGU_OUT1 clock output

      BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
      BASE_ADCHS_CLK is only available on LPC4370.

  clocks:
    maxItems: 5

  clock-indices:
    minItems: 1
    maxItems: 28

  clock-output-names:
    minItems: 1
    maxItems: 28

required:
  - compatible
  - reg
  - clocks
  - '#clock-cells'

additionalProperties: false

examples:
  - |
    clock-controller@40050000 {
        compatible = "nxp,lpc1850-cgu";
        reg = <0x40050000 0x1000>;
        #clock-cells = <1>;
        clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
    };

