# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/loongson,ls2k0500-mmc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: The SD/SDIO/eMMC host controller for Loongson-2K family SoCs

description:
  The MMC host controller on the Loongson-2K0500/2K1000 (using an externally
  shared apbdma controller) provides the SD and SDIO device interfaces.
  The two MMC host controllers on the Loongson-2K2000 are similar,
  except that they use internal exclusive DMA. one controller provides
  the eMMC interface and the other provides the SD/SDIO interface.

maintainers:
  - Binbin Zhou <zhoubinbin@loongson.cn>

allOf:
  - $ref: mmc-controller.yaml#

properties:
  compatible:
    enum:
      - loongson,ls2k0500-mmc
      - loongson,ls2k1000-mmc
      - loongson,ls2k2000-mmc

  reg:
    minItems: 1
    items:
      - description: Loongson-2K MMC controller registers.
      - description: APB DMA config register for Loongson-2K MMC controller.

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  dmas:
    maxItems: 1

  dma-names:
    const: rx-tx

required:
  - compatible
  - reg
  - interrupts
  - clocks

unevaluatedProperties: false

if:
  properties:
    compatible:
      contains:
        enum:
          - loongson,ls2k0500-mmc
          - loongson,ls2k1000-mmc

then:
  properties:
    reg:
      minItems: 2

  required:
    - dmas
    - dma-names

else:
  properties:
    reg:
      maxItems: 1

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/loongson,ls2k-clk.h>

    mmc@1fe2c000 {
        compatible = "loongson,ls2k1000-mmc";
        reg = <0x1fe2c000 0x68>,
              <0x1fe00438 0x8>;
        interrupt-parent = <&liointc0>;
        interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clk LOONGSON2_APB_CLK>;
        dmas = <&apbdma1 0>;
        dma-names = "rx-tx";
        bus-width = <4>;
        cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
    };

  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/loongson,ls2k-clk.h>

    mmc@79990000 {
        compatible = "loongson,ls2k2000-mmc";
        reg = <0x79990000 0x1000>;
        interrupt-parent = <&pic>;
        interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clk LOONGSON2_EMMC_CLK>;
        bus-width = <8>;
        non-removable;
        cap-mmc-highspeed;
        mmc-hs200-1_8v;
        no-sd;
        no-sdio;
    };
