# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/fsl,vf610-iomuxc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale Vybrid VF610 IOMUX Controller

description:
  Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
  and usage.

maintainers:
  - Frank Li <Frank.Li@nxp.com>

properties:
  compatible:
    const: fsl,vf610-iomuxc

  reg:
    maxItems: 1

patternProperties:
  'grp$':
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.

    properties:
      fsl,pins:
        description:
          two integers array, represents a group of pins mux and config setting.
          The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a pin
          working on a specific function, CONFIG is the pad setting value such
          as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
          datasheet for the valid pad config settings.
        $ref: /schemas/types.yaml#/definitions/uint32-matrix
        items:
          items:
            - description:
                PIN_FUN_ID refer to vf610-pinfunc.h in device tree source folder
                for all available PIN_FUNC_ID for Vybrid VF610.
            - description: |
                CONFIG bits definition is
                PAD_CTL_SPEED_LOW               (1 << 12)
                PAD_CTL_SPEED_MED               (2 << 12)
                PAD_CTL_SPEED_HIGH              (3 << 12)
                PAD_CTL_SRE_FAST                (1 << 11)
                PAD_CTL_SRE_SLOW                (0 << 11)
                PAD_CTL_ODE                     (1 << 10)
                PAD_CTL_HYS                     (1 << 9)
                PAD_CTL_DSE_DISABLE             (0 << 6)
                PAD_CTL_DSE_150ohm              (1 << 6)
                PAD_CTL_DSE_75ohm               (2 << 6)
                PAD_CTL_DSE_50ohm               (3 << 6)
                PAD_CTL_DSE_37ohm               (4 << 6)
                PAD_CTL_DSE_30ohm               (5 << 6)
                PAD_CTL_DSE_25ohm               (6 << 6)
                PAD_CTL_DSE_20ohm               (7 << 6)
                PAD_CTL_PUS_100K_DOWN           (0 << 4)
                PAD_CTL_PUS_47K_UP              (1 << 4)
                PAD_CTL_PUS_100K_UP             (2 << 4)
                PAD_CTL_PUS_22K_UP              (3 << 4)
                PAD_CTL_PKE                     (1 << 3)
                PAD_CTL_PUE                     (1 << 2)
                PAD_CTL_OBE_ENABLE              (1 << 1)
                PAD_CTL_IBE_ENABLE              (1 << 0)
                PAD_CTL_OBE_IBE_ENABLE          (3 << 0)

    required:
      - fsl,pins

    additionalProperties: false

required:
  - compatible
  - reg

allOf:
  - $ref: pinctrl.yaml#

unevaluatedProperties: false
