# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/everest,es8326.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Everest ES8326 audio CODEC

maintainers:
  - David Yang <yangxiaohua@everest-semi.com>

properties:
  compatible:
    const: everest,es8326

  reg:
    maxItems: 1

  clocks:
    items:
      - description: clock for master clock (MCLK)

  clock-names:
    items:
      - const: mclk

  interrupts:
    maxItems: 1
    description: interrupt output for headset detection

  "#sound-dai-cells":
    const: 0

  everest,jack-pol:
    $ref: /schemas/types.yaml#/definitions/uint8
    description: |
      just the value of reg 57. Bit(3) decides whether the jack polarity is inverted.
      Bit(2) decides whether the button on the headset is inverted.
      Bit(1)/(0) decides the mic property to be OMTP/CTIA or auto.
    minimum: 0x00
    maximum: 0x0f
    default: 0x0f

  everest,mic1-src:
    deprecated: true
    $ref: /schemas/types.yaml#/definitions/uint8
    description:
      the value of reg 2A when headset plugged.
    minimum: 0x00
    maximum: 0x77
    default: 0x22

  everest,mic2-src:
    deprecated: true
    $ref: /schemas/types.yaml#/definitions/uint8
    description:
      the value of reg 2A when headset unplugged.
    minimum: 0x00
    maximum: 0x77
    default: 0x44

  everest,jack-detect-inverted:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Defined to invert the jack detection.

  everest,interrupt-src:
    $ref: /schemas/types.yaml#/definitions/uint8
    description: |
      value of reg 0x58, Defines the interrupt source.
      Bit(2) 1 means button press triggers irq, 0 means not.
      Bit(3) 1 means PIN9 is the irq source for jack detection. When set to 0,
      bias change on PIN9 do not triggers irq.
      Bit(4) 1 means PIN27 is the irq source for jack detection.
      Bit(5) 1 means PIN9 is the irq source after MIC detect.
      Bit(6) 1 means PIN27 is the irq source after MIC detect.
    minimum: 0
    maximum: 0x3c
    default: 0x08

  everest,interrupt-clk:
    $ref: /schemas/types.yaml#/definitions/uint8
    description: |
     value of reg 0x59, Defines the interrupt output behavior.
     Bit(0-3) 0 means irq pulse equals 512*internal clock
       1 means irq pulse equals 1024*internal clock
       2 means ...
       7 means irq pulse equals 65536*internal clock
       8 means irq mutes PA
       9 means irq mutes PA and DAC output
     Bit(4) 1 means we invert the interrupt output.
     Bit(6) 1 means the chip do not detect jack type after button released.
       0 means the chip detect jack type again after button released.
    minimum: 0
    maximum: 0x7f
    default: 0x00

required:
  - compatible
  - reg
  - "#sound-dai-cells"

additionalProperties: false

examples:
  - |
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
      es8326: codec@19 {
        compatible = "everest,es8326";
        reg = <0x19>;
        clocks = <&clks 10>;
        clock-names = "mclk";
        #sound-dai-cells = <0>;
        everest,jack-pol = [0e];
        everest,interrupt-src = [08];
        everest,interrupt-clk = [00];
      };
    };
